Brocade Web Tools Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 221)

Modifying Active Directory service
To change the parameters of a Active Directory service that is already configured, perform the following
steps.
1. Open the Switch Administration window as described in Opening the Switch Administration window
on page 52.
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Modify.
The RADIUS/ADLDAP/TACACS+ Configuration dialog box displays.
5. Enter new values for the port, timeout, and domain.
6. Click OK to return to the AAA Service tab.
7. Click Apply.
Removing Active Directory service
To remove an Active Directory server, perform the following steps.
1. Open the Switch Administration window as described in Opening the Switch Administration window
on page 52.
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Remove.
NOTE
The server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation dialog box displays, warning you that you are about to remove the selected server.
6. Click Yes in the confirmation dialog box.
TACACS+ management
TACACS+ provides user authentication and authorization using TACACS as the authentication protocol.
You can add, remove, and modify settings of TACACS+ Server.
Enabling and disabling TACACS+
At least one TACACS+ server must be configured before you can enable TACACS+.
To enable or disable TACACS+, perform the following steps.
1. Open the Switch Administration window as described in Opening the Switch Administration window
on page 52.
2. Select the AAA Service tab.
3. To enable TACACS+, select TACACS+ from the Primary AAA Service menu.
Modifying Active Directory service
Web Tools Administrator's Guide 221
53-1003169-01