beautypg.com

Brocade Web Tools Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 83

background image

The path name should use the following structure:

////release.plist

In this syntax, the > is the path up to the entry point of > and
> is where the unzipped version of Fabric OS is located, for example:

//directory_1/my_directory/v7.0.0/release.plist

5. Select the protocol type in the Protocol Type field.

If you select "Secure Copy Protocol (SCP)" or "Secure File Transfer Protocol (SFTP)", you cannot
specify "anonymous" in the User field.

6. Click Apply.

The firmware download begins. You can monitor the progress by looking at the Firmware Download
progress bar.

NOTE
About halfway through the download process, after the firmware is downloaded to the switch,
connection to the switch is lost and Web Tools invalidates the current session. Web Tools invalidates
all windows because upfront login is always enabled and cannot be disabled.

7. Close all Web Tools windows and log in again.

If the firmware download is in progress when you log in, you can continue to monitor its progress.

Maintaining Configurations and Firmware

Web Tools Administrator's Guide

83

53-1003169-01