IEI Integration IBS-19A - Manual (Page 61)

IBS-19A Series Medical Panel PC
Page 61
5.1 System Maintenance Introduction
A user cannot replace the motherboard, memory modules or other internal components. If
the internal components fail, it must be shipped back to PACSmate to be replaced. If the
internal system components have failed, please contact the system vendor, reseller or a
PACSmate sales person directly.
If the HDD of the IBS-19A Series fail, it must be replaced. The HDD replacement
instructions are described below.
5.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
IBS-19A Series may result in permanent damage to the IBS-19A
Series and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IBS-19A Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the panel PC is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: - When configuring the IBS-19A Series, place it on an
antic-static pad. This reduces the possibility of ESD damaging the IBS-19A
Series.
ƒ Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.