IEI Integration IBS-19A - Manual (Page 155)

IBS-19A Series Medical Panel PC
Page 24
LED_ModeSet.LED_04 = LED_DispMode_BLNK; //G
LED_ModeSet.LED_05 = LED_DispMode_BLNK; //B
LED_ModeSet.LED_06 = LED_DispMode_BLNK; //R
LED_ModeSet.LED_07 = LED_DispMode_BLNK; //G
LED_ModeSet.LED_08 = LED_DispMode_BLNK; //B
LED_ModeSet.LED_09 = LED_DispMode_BLNK; //R
LED_ModeSet.LED_10 = LED_DispMode_BLNK; //G
LED_ModeSet.LED_11 = LED_DispMode_BLNK; //B
LED_ModeSet.LED_12 = LED_DispMode_BLNK; //R
LED_ModeSet.LED_13 = LED_DispMode_BLNK; //G
LED_ModeSet.LED_14 = LED_DispMode_BLNK; //B
LED_ModeSet.LED_15 = LED_DispMode_BLNK;
//Set Structure: Enable blinking of IC
LED_Blinking_Type.BLNK_TYPE = LED_BLNK_ON;
LIGHTBAR_BLNK_Settings(hSMB_Dev, LED_Blinking_Set); //Set LED blinking settings.
LIGHTBAR_LED_ModeSet(hSMB_Dev, LED_ModeSet) //Set LED Operation Mode.
LIGHTBAR_BLNK_Type(hSMB_Dev, LED_Blinking_Type); //Enable LED Blinking.
}
D.7.4 LED Blink - 2
{
PLED_MODE_SETTINGS LED_ModeSet =
(PLED_MODE_SETTINGS)malloc(sizeof(LED_MODE_SETTINGS));
PLED_BLNK_SET LED_Blinking_Set = (P LED_BLNK_SET)malloc(sizeof(LED_BLNK_SET));
PLED_BLNK_TYPE LED_Blinking_Type =
(PLED_BLNK_TYPE)malloc(sizeof(LED_BLNK_TYPE));
// Set Structure: Set Broadcast address
LED_ModeSet.Main_Addr = 0xD0;
LED_Blinking_Set.Main_Addr = 0xD0;
LED_Blinking_Type.Main_Addr = 0xD0;
//Set Structure: Set blinking settings.
LED_Blinking_Set.BLNK_Freq = 0x07; //300ms
LED_Blinking_Set.BLNK_DutCyc = 0x80; //50:50