XLT XD-9010B User Manual
Page 23
23
Oven Installation
Physical Location & Spacing Requirements
XLT Ovens are suitable for installation on either combustible or non-combustible floors,
and adjacent to either combustible or non-combustible walls. The motor cover is designed to pro-
vide the proper clearance to the back of the oven. The minimum side clearances are 6in. / 150mm,
measured from the end of the conveyor.
Electric Supply Requirements for Australian, Standard. & World Ovens
In Australia, the electrical service must be installed in accordance with the latest
version of AS/NZS 3000 wiring rules.
Australian Ovens
When installed, the appliance must be electrically grounded in accordance with
local codes, or in the absence of local codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable.
Electrical Grounding Instructions
This appliance is equipped with a three-prong (grounding) plug for your pro-
tection against shock hazard and should be plugged into a properly grounded
three-prong receptacle. Do not cut or remove the grounding prong from this
plug
.
Standard Ovens
World Ovens
This appliance is equipped with a ground lug for your protection against shock
hazard and must be properly grounded.
When installed, the appliance must be electrically grounded in accordance with
local codes.
HIGH
VOLTAGE
CAUTION
All installations must conform to local building and mechanical codes.
NOTE