Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 83)

SAS InFusion User Manual Version 2.0
LeCroy Corporation
69
Step 6 Click OK to close the Event Properties dialog box.
Step 7 In the State 0 area, click on the prompt to add an action
(Figure 77).
Figure 74 Example 7: Adding the First Sequence
Step 8 The Action Properties dialog box appears (Figure 78). For the
action, select Branch to a New State.
Step 9 Click on the OK button to close the Action Properties dialog box.
This saves the action and automatically creates an area for
State 1 in the scenario.
Step 10 In the State 1 area, click on the prompt to add an event
(Figure 79).
Step 11 The Event Properties dialog box appears. In the Event
Properties dialog box, choose the Identify Address Frame
event. In the Direction column, select From Target (you want
State 1 to trigger on an Identify Address frame received from the