Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 17)

SAS InFusion User Manual Version 2.0
LeCroy Corporation
3
Chapter 2: General Description
This chapter describes the SAS InFusion hardware device.
System Components/Packing List
• SAS InFusion hardware device.
• One power cable.
• One BNC cable.
• Two external-to-internal SATA/SAS Cables.
• Two internal-to-external Junction Boards.
• Five internal-to-internal Junction Boards.
• SAS InFusion software application program on CD-ROM.
• User Manual.
Note: For brevity, this manual calls the SAS InFusion hardware device the
SAS InFusion box.
SAS InFusion Front Panel
The front panel of the SAS InFusion box consists of an LCD panel, three control buttons,
two external SAS/SATA connectors, and three LEDs (Figure 1).
Figure 1 SAS InFusion Front Panel
LCD Panel The LCD panel displays backlit four-line, twenty-four character messages. It is a
menu-driven interface that allows a user to configure the box, view status, select
scenarios to run, and stop and start scenarios.
Chapter 6 describes the LCD panel menus. The first menu to appear after boot-up is the
Root menu (shown in Figure 1).When SAS InFusion box is turned ON for the first time,
the LCD panel shows two menu items:
Box Setup
SAS Configuration