Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 21)

SAS InFusion User Manual Version 2.0
LeCroy Corporation
7
Chapter 3: Installation and Setup
This chapter describes how to install and setup the SAS InFusion software application
and hardware device (the SAS InFusion box).
PC Requirements
SAS InFusion software installs on a Windows XP or Windows 2000 PC.
Refer to the readme file on the installation CD for PC requirements.
PC Firewall and Other Communication Settings
Software firewalls, IP filtering, IP security policies, and other items can limit the types of
messages that a PC can receive from the SAS InFusion. box. This can particularly affect
users attempting to dial-into a network and administer SAS InFusion remotely.
Note: In order for SAS InFusion boxes to be visible on the network and to
communicate correctly, set communication parameters on the PC
as follows.
• Allow to initiate outbound TCP connections using ports 4000 and 4001
• Allow to send UDP broadcast messages using port 4002
• Allow to accept and process UDP messages using ports 4003 and 4004
(Dial-in users must set communication parameters in the dial-in
software.)
Note: The mechanism by which SAS InFusion software discovers
(establishes communication with) boxes on the network only allows
one instance of the SAS InFusion software to run at a time. This
limitation includes applications based on the SAS InFusion API that
the user has created.
Installing SAS InFusion Software
SAS InFusion software installs on a windows-based PC. To install the software:
Step 1 Insert the SAS InFusion software CD into the CD ROM drive of the PC
that you will use to create SAS InFusion scenarios. The CD software
installer application runs.
Step 2 Follow the onscreen instructions for installing the software on
the PC hard drive.
Step 3 To start the application, launch the LeCroy SAS InFusion
program from the Start menu (Start > Programs > LeCroy >
InFusion > LeCroy InFusion). The application display appears.