Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 34)

Version 2.0 SAS InFusion User Manual
20
LeCroy Corporation
Table 3 Log Buttons
Device List
Figure 21 Device List Window
The Device List window keeps track of SAS InFusion boxes that it detects on the Ethernet
network (Figure 21). It shows identity information about each box, such as its name, IP
address, and license status. It also allows you to change the values in these fields.
Device List Fields
The fields in the Device List window have the following functions:
: Selects the box for use and locks it so that other users cannot use it.
Only one user can control a box at a time.
Status: Indicates if the box is ready for use or busy. For example, if a box
has been locked by another user, it will show up in the Status field as Busy.
The Status field also shows the name of the host PC connected to the box.
Name: Displays the name of the SAS InFusion platform. This is a
user-configurable field.
Protocol: Indicates the protocol of the InFusion box. At present, SAS is the
only option. Future InFusion products will be based upon other protocols.
IP Address: Lists the IP address of each device. The little grey box to the
right allows you to change the IP address directly from this screen.
MAC Address: Lists the MAC address of the box. The MAC address is a
factory-assigned setting that can not be changed. You can confirm the
MAC address by looking at the MAC address sticker affixed to the bottom of
the SAS InFusion box. It is also listed in the LCD menu (Box Setup >
About).
Output Toolbar
Save Log
Start Logging
Print Log
Stop Logging
Log Options Clear Log