Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 36)

Version 2.0 SAS InFusion User Manual
22
LeCroy Corporation
Add Device to List
Selecting the Add Device to List button will bring up a screen (see below) that will allow
you to enter the IP Address (this is the address that was entered into the InFusion box in
“Assigning a Static IP Address Using the LCD Panel” on page 9).
Figure 22 Add Device to List Dialog
Enter any notes you would like associated with this device, and click OK. The device will
now appear on the list of available devices.
Update Device
If a device is highlighted in the list, selecting the Update Device button will bring up a
dialog box to allow you to update the BusEngine and/or the firmware (default setting is to
update both). See “Updating Firmware and Bus Engine” on page 12 for more details.
Open Device Library
If a device is highlighted in the list, selecting the Open Device Library button will add the
device library to the screen (alongside the Main Library).
Figure 23 Device Libraries
If the device library contains test cases, these test cases can be selected and run using
the arrow button (or stopped using the black square) either on the device list or on the
device library screen.