Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 10)

Version 2.0 SAS InFusion User Manual
x
LeCroy Corporation
S
AFETY
R
EQUIREMENTS
This section contains information and warnings that must be observed to keep the SAS
InFusion or SATA InFusion operating in a correct and safe condition. You are required to
follow generally accepted safety procedures in addition to the safety precautions
specified in this section.
Safety Symbols and Terms
Where the following symbols or terms appear on front or rear panels of SAS/SATA
InFusion, or in this manual, they alert you to important safety considerations.
Symbol Description
This symbol is used where caution is required. Refer to accompanying information
or documents in order to protect against personal injury or damage to the
instrument.
This symbol is used to denote a safety ground connection.
I
On (Supply)
O
Off (Supply)
This symbol is used to denote "Alternating Current."
CAUTION The CAUTION sign indicates a potential hazard. It calls attention to a procedure,
practice or condition which, if not followed, could possibly cause damage to
equipment. If a CAUTION is indicated, do not proceed until its conditions are fully
understood and met.
WARNING The WARNING sign indicates a potential hazard. It calls attention to a procedure,
practice or condition which, if not followed, could possibly cause bodily injury or
death. If a WARNING is indicated, do not proceed until its conditions are fully
understood and met.