X” (track#) cock track, Y” (track#) un-cock track, Z” un-cock global – Gilderfluke&Co 'Smart' Brick Animation Control System User Manual
Page 54

their first frames on all addressed Smart Brick Brain(s). This
command is only valid for INTERNALLY and EXTERNALLY
clocked shows, since both LaserDisk (or DVD) and Smpte
clocked shows are at the mercy of time code they are
receiving. If the Smart Brick Brain(s) are in the delay
mode when the RESET is received (no matter the time
code being used), then the Brain(s) will check their
thumbwheel switches and reinitialize their countdown
clocks upon receiving this command.
“X” (track#) Cock Track:
This command sets the cocked flag on the Smart
Brick Brain specified by the TRACK#. Any Smart Brick
Brain which has been ‘cocked’ will respond to whatever
the next ‘cocked’ commands that is received. This flag
will be reset upon the receipt of any ‘COCKED’ com-
mand, or by using one of the two following RESET
COCKED commands.
EXAMPLE: to cock Smart Brick Brain 00:
X 0 0
“Y” (track#) Un-Cock Track:
This command resets the cocked flag on the Smart
Brick Brain addressed by the TRACK#. After this flag is
reset, the addressed Smart Brick Brain will no longer re-
spond to COCKED commands.
EXAMPLE: to un-cock Smart Brick Brain 00:
Y 0 0
“Z” Un-Cock Global:
This command resets the cocked flag on all the
Smart Brick Brains in the system. After the cocked flags
are reset, no Smart Brick Brains in the system will respond
to any COCKED commands.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
44 of 178