Command not available on all sony models – Gilderfluke&Co 'Smart' Brick Animation Control System User Manual
Page 180

COMMAND
HEX CHARACTER SENT
POSITIVE RESPONSE
AUDIO MUTE ON
2
24
8A
Stops the audio output from the player.
AUDIO MUTE OFF
1
25
8A
Enables the audio output from the player.
CH-1 ON
46
8A
Turns on Audio output from Channel 1 to ‘LEFT’ audio output connec-
tor.
CH-1 OFF
47
8A
Turns off Audio output from CH 1 audio. CH 2 audio will go to both
outputs if it is still enabled.
CH-2 ON
48
8A
Turns on Audio output from Channel 2 to ‘Right’ audio output con-
nector.
CH-2 OFF
49
8A
Turns off Audio output from CH 2 audio. CH 1 audio will go to both
outputs if it is still enabled.
CLEAR ALL
56
Stops any ongoing command and puts player into STILL mode.
EJECT
3
2A
8A 83
Opens the disk compartment. Returns 8A immediately, 83 when task
is completed.
EJECT ENABLE
2
74
8A
Enables the ‘Eject’ button on the front of the LaserDisk player.
EJECT DISABLE
2
75
8A
Disables the ‘Eject’ button on the front of the LaserDisk player.
F-PLAY
3A
8A
Puts the player in normal play mode.
F-STEP and STILL
2
2B
8A
Steps the LaserDisk forward by one frame and display still frame.
R-STEP and STILL
2
2C
8A
Steps the LaserDisk backwards by one frame and display still frame.
FRAME # MODE
55
8A
Sets the player to ‘frame’ mode. This is the only mode which will work
with the Smart Brick Brain.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
170 of 178
2
Command not available on all Sony models
3
Command not available on all Sony models