FEC DSP1500 (SAN3) - Manual (Page 5)

v (Rev. 4)
Read all instructions before operating the equipment in order to use this equipment safely and correctly.
Read this instruction manual carefully and fully understand the equipments functions, safety precautions
and instructions prior to using the equipment. Safety precautions in this manual are marked with two
symbols [Warning] and [Caution].
To prevent danger to the user and other persons as well as property damage, instructions that must be
fully observed are marked with the symbols below.
◆ This instruction manual uses the following two symbols according to the degree of damage that may
be caused when the instruction is not observed.
Even instructions that are marked with may result in severe damage if they are
not observed according to conditions.
Contents marked with the above symbols are very important instructions. For your safety, follow all
instructions and especially those marked with these symbols.
◆ This instruction manual uses the following additional symbols for instructions that shall be observed.
Warning
Caution
This symbol indicates that failure to observe instruction marked
with this symbol may result in severe personal injury or death.
This symbol indicates that failure to observe instruction marked
with this symbol may result in minor personal injury or material
damage.
Caution
Warning:
Fire
Caution:
Electric shock
Ground
Prohibited Do not disassemble
Required
Warning:
Electric shock
Caution:
Fire
Safety Precautions
Caution:
High Temperature
Warning:
Pinch Point