FEC DSP1500 (SAN3) - Manual (Page 2)

(Rev. 4) ii
Revisions
Revision
Revision
Date Revision History
Firmware
Version*
3 11/2007 Initial Release 3.14
3.1 10/2008
Minor Revision
Chapter 2 - Updated chart for new power requirements.
Chapter 4 - Updated transformer sizing chart based on new
power requirements.
3.156
4 01/2010
Added functionality for SAN4 Controller.
Added functionality for DPM & DPS Series presses.
Chapter 6 - Added Real Time Clock functionality for new
SAN3-DP1/2S keypad display.
Chapter 7 - Expanded on lubrication requirements.
3.201
* Firmware Version at Revision Date.
Manual Numbering Convention
DSP1500 E-HS-4
DSP1500 = Servo Press
AFC1500 = Nutrunner Version Number
FUSION = DC Hand Tool
HS = SAN Unit Hardware
Operation Manual
HM = Multi / Main Unit Hardware
Operation Manual
HM-ENET = Ethernet Manual for
Multi / Main Unit
SW = Software Manual
DSP1500 = Servo Press
AFC1500 = Nutrunner
FUSION = DC Hand Tool
E = English Version
S = Spanish Version
*Japanese Version furnished by DDK
uses DDK numbering convention.
Version Number
(Major Revision Level)