Micromod MOD: 30ML and Modcell Maintenance for 2001N, 2002N, and 1800R - Manual (Page 9)

MOD30ML and Modcell Maintenance
INTRODUCTION
1.4 REPAIR PHILOSOPHY
The repair philosophy for the MODCELL and MOD 30ML instruments is repair by
replacement at the module level. The module level includes those instrument components,
which can be removed and installed manually via plug-in connections. The modularized
design of these instruments permits easy field replacement of components such as I/O
modules, communication modules, identity module and the portable memory module. If a
fault is detected in the processor (2001N, 2002N or 1800R) return of the unit for repair or
replacement is recommended.
All instrument components, which are identified by a catalog number are available for
purchase. The components and their numbers are listed in Section 8.
1.5 RELATED INFORMATION
A general description of the MODCELL and MOD 30ML instruments, mechanical installation
instructions, electrical connection instructions, and communication connection instructions
can be found in the following documents.
• IB-23C600 - Installation for MODCELL Multiloop Processor
• IB-23C601 - Installation for Remote I/O modules (Extended I/O)
• IB-1800R-INS - Installation for MOD 30ML Multiloop Controller
• IB-1800R-M30 - Installation for the MOD 30ML Replacement for MOD 30 Instruments
• IB-23A160 - Instructions for Instrument Communications Network (ICN) Planning
Installation and setup information for the communications link can be found in the following
documents:
• IB-23C001 - Instructions for 1720N Communications Link
• IB-23C003 - Users guide for 17321N ICN Mini Link
• IB-23C004 - Users Guise for 1733N Mini Link/External
Reference information on the data base structure and configuration parameters applicable to
both MODCELL and MOD 30ML instruments can be found in the following documents.
• IB-23G600 - Data Base Reference for Logic I/O and Communication Functions
• IB-23G601 - Data Base Reference for Advanced Control Functions
• IB-23G602 - Data Base Reference for Algorithm, Table and Sequencer Functions
• IB-23H141 - User’s Guide for MODCELL Application Builder Software
General operation and setup information, and reference information on the data base
structures and configuration parameters, which apply only to the MOD 30ML Multiloop
Controller can be found in the following documents.
• IB-1800R-OPR - Operation for MOD 30ML Multiloop Controller
• IB-1800R-APP - Data Base Reference for Display, Alarm, and Built-in I/O Functions
Training labs and tutorial can be found in the following documents:
• IB-VIZAPP-TUT – Training labs for configuring MOD 30ML using ViZapp Software.
1 -3