Micromod MOD: 30ML and Modcell Maintenance for 2001N, 2002N, and 1800R - Manual (Page 117)

MOD30ML and Modcell Maintenance Manual
HARDWARE, FIRMWARE AND SOFTWARE REVISION HISTORY
SECTION 9
HARDWARE, FIRMWARE AND SOFTWARE REVISION HISTORY
9.1 GENERAL
This section provides information about revisions introduced for Modcell and MOD 30ML
instruments and associated firmware, and revisions introduced for configuration software and
device driver software since the initial introduction of these products.
The starting point of these historical records is either the date of the initial product
introduction or the date of the revision, which made the product usable with Modcell or MOD
30ML instruments. Either a number or a model letter identifies the product revisions. The
numbers apply to firmware and software revisions; the model letters apply to hardware
revisions.
9.2
HARDWARE AND FIRMWARE REVISIONS
The revision history for Modcell and MOD 30ML instruments and associated firmware is
listed in Table 9.1. The products included in the listing are as follows:
• 1720N Communications Link
• ICN Mini Link
1731N Mini Link Board
1732N ICN Interface (Controller) Board
1733N Mini Link/External with 1732N ICN Interface (Controller) Board
• MOD 30ML Multiloop Controller - 1800R
• MODCELL Multiloop Processor
• 2001N, 2002N Base Boards
• 2001P, 2002P, 2004P, 2005P Identity Modules
• 2031N, 2032N, 2033N, 2034N Communications Modules
• 2020N Remote I/O Interface Module
9.3
SOFTWARE REVISIONS
The revision history for Modcell software is listed in Table 9.2. The products included in the
listing are as follows:
• 1706S Instrument Configuration Software
• 2006S Application Builder Software
• 1716S ICN Driver for PC-30
• 1719S Modbus Driver for PC-30
• 1733S Extended Modbus Driver for PC-30
• Extended Modbus Driver for FIX DMACS and FIX MMI
2010S 16-Bit Driver
2011S 32-Bit Driver
9 -1