Meriam MFT 4010 Modular Calibrator_HART Communicator - Manual (Page 86)

81
MFT ACCESSORIES LIST
Sensor Modules – see list on previous page
P/N A36741 Protection module for open sensor bays
P/N 9B000007 Power adapter for 100 - 240 Vac, 50 / 60 Hz with US plug and int’l plug adapter kit, barrel connector
P/N A900614-00011 6-pack AA alkaline batteries (1.5V), also approved for Intrinsic Safety
P/N A900614-00014 6-pack AA NiMH batteries (1.2V), also approved for Intrinsic Safety
P/N A37134 Energy 8 NiMH battery Charger (100-240 AC/50 or 60 Hz), Univ. Plug Kit
P/N A36821 250 ohm shunt required for HART
® communication on low resistance loops (included with
MFT 4005 and 4010)
P/N A900529-00014 HART test lead kit (inc’d with MFT 4005 and 4010)
P/N A900529-00011 Standard banana jack test lead kit (inc’d with all MFT 40XX)
P/N B34686
† Pressure pump with variator, 145 PSI max.
P/N B34700 † Vacuum pump with variator, -600 mm Hg max.
P/N A34386 † low pressure fittings and tubing kit – vacuum to 150 PSI; connectors, tees, NPT adapters
P/N A900020-90502 high pressure fittings and hose – up to 9000 PSI; 3’ hose w/ 1 /
8
” & 1 /
4
” MNPT x quick connect fittings
P/N A900028-90201 Class A, 100 Ω platinum RTD probe, ¼” OD, 10” length, 304SS sheath, 5 foot coiled cable with
connector for use with RIO4000 RTD measure and simulate module
P/N A36749 Soft carrying case with shoulder strap for base unit, modules, pump and test leads
P/N A36750
† Hard carrying case with handle – foam insert for base unit with 3 installed modules, 4 additional modules,
test leads, hand pump, RTD temperature probe, fittings and tubing
Kit Options - Standard kit includes A36750 hard carrying case, pneumatic pump choice, A34386 low pressure connection
kit.
P/N A36785 Standard kit with B34686 pressure pump
P/N A36786 Standard kit with B34700 vacuum pump
† Designates Kit item