Liquid Controls SP4000 - Manual (Page 84)

81
SP4000 Flow Computer
The flow computer can be connected via RS-232 interface to a
personal computer or printer.
Selection:
COMPUTER, PAGER, PRINTER, MODEM
Display: COMPUTER
RS-232 USAGE
Enter the unique unit I.D. tag number for the flow computer if a
number of flow computers are connected to the same interface.
Selection:
Max. 2 digit number: 0...99
Display: 1
DEVICE ID
Enter the baud rate for serial communication between the flow
computer and a personal computer, modem, pager or printer.
Selection:
9600, 2400, 1200, 300
Display: 9600
BAUD RATE
Select the desired parity. The setting selected here must agree with
the parity setting for the computer, modem, pager or printer.
Selection:
NONE, ODD, EVEN
Display: NONE
PARITY
The control of data flow can be defined. The setting required is
determined by the handshaking of the printer.
Selection:
NONE, HARDWARE
Display: NONE
HANDSHAKE
RS-232 USAGE
DEVICE ID
BAUD RATE
PARITY
HANDSHAKE
COMMUNICATION
6.13
COMMUNICATION