Liquid Controls SP4000 - Manual (Page 36)

33
SP4000 Flow Computer
EZ SETUP
EZ SETUP
EZ Setup
Example:
Gas Corrected Volume
Turbine Flowmeter
UNITS
FLOW EQUATION
The EZ Setup routine is a quick and easy way to configure the most
commonly used instrument functions. We recommend first
completing the EZ Setup routine for the flow equation and meter
type for your initial application. The setup can then be customized
using the complete submenu groups described later in this chapter.
Caution:
Entering the EZ Setup mode automatically sets many
features to a default value (without prompting the user).
This may cause any previously programmed information to
be lost or reset.
Selection:
YES, NO
Display: EZ SETUP? YES
PAUSE COMPUTATIONS
Note:
The "Pause Computations" warning message informs the
user that all computations are halted while programming EZ
Setup.
Select the desired units of measure.
Selection:
METRIC, ENGLISH
Display: ENGLISH
UNITS?
Select the flow equation appropriate for your application.
Selection:
STEAM MASS, STEAM HEAT, STEAM NET HEAT,
STEAM DELTA HEAT, GAS CORRECTED VOLUME, GAS
MASS, GAS COMBUSTION HEAT, LIQ.CORRECTED
VOLUME, LIQUID MASS, LIQ. COMBUSTION HEAT,
LIQUID SENSIBLE HEAT, LIQUID DELTA HEAT
Display: GAS CORRECTED VOLUME
FLOW EQUATION
6.2
EZ
SETUP