Liquid Controls SP4000 - Manual (Page 41)

38
SP4000 Flow Computer
The Flow Equation sets the basic functionality of the unit. Choose the
Flow Equation for your particular application.
Note:
Various setup data is only available depending on the flow
equation selected. The flow equation also determines the
assignment of the inputs.
Caution:
Select the flow equation as the first step. We recommend
using the EZ Setup to select the proper flow equation. The
user can then enter the submenu groups and make additional
changes as desired.
Selection:
GAS COMBUSTION HEAT, GAS MASS, GAS CORRECTED
VOLUME, STEAM DELTA HEAT, STEAM NET HEAT,
STEAM HEAT, STEAM MASS, LIQUID DELTA HEAT,
LIQUID SENSIBLE HEAT, LIQ. COMBUSTION HEAT,
LIQUID MASS, LIQ. CORRECTED VOLUME.
Display: GAS CORRECTED VOLUME
FLOW EQUATION
Enter the date in this format: Day - Month - Year.
Note:
After prolonged breaks in the power supply (several days) or
upon initial start-up of the unit, the date and time must be
reset. This does not apply to units with the datalogger or
language option.
Input:
Flashing selections can be changed.
Store and Confirm entries with the ENTER key
Display: 08 FEB 1996
ENTER DATE
The "Daylight Savings" mode allows the unit to automatically adjust
the time according to daylight savings time change
Note:
Select "Yes" to enable the Daylight Savings Mode
Selection:
Yes, No
Display: Yes
DAYLIGHT SAVINGS
SYSTEM PARAMETERS
6.4
SYSTEM
PARAMETERS
(Continued)
ENTER
CLEAR
FLOW EQUATION
ENTER DATE
DAYLIGHT SAVINGS
TIME