Liquid Controls SP4000 - Manual (Page 71)

68
SP4000 Flow Computer
6.8
FLOW INPUT
(Continued)
FLOW INPUT
VIEW INPUT SIGNAL This feature is used to see the present value of the flow input signal.
The type of electrical signal is determined by the flowmeter input
signal type selection.
Display: 150 Hz
VIEW INPUT SIGNAL
BYPASS CAL.
FACTOR
BYPASS EAm
FACTOR
2
RATE 1
TOTAL
BYPASS DC
FACTOR
2
RATE 1
TOTAL
2
RATE 1
TOTAL
BYPASS Ym
FACTOR
FLOWMETER
LOCATION
2
RATE 1
TOTAL
Enter the Flowmeter Location
Selection:
Hot, Cold:
Display: COLD
FLOWMETER LOCATION
Enter the Bypass Calibration Factor.
Input:
Max. 6 digit number: 0.000001...999999
Display: 1.000000
BYPASS CAL. FACTOR
Enter the Bypass EAm Factor.
Input:
Max. 6 digit number: 0.000001...999999
Display: 1.000000
BYPASS EAM FACTOR
Enter the Bypass DC Factor.
Input:
Max. 6 digit number: 0.1...10.0
Display: 1.000000
BYPASS DC FACTOR
Enter the Bypass Ym Factor.
Input:
Max. 6 digit number: 0.001...1.0
Display: 1.000000
BYPASS YM FACTOR
VIEW HIGH RANGE
SIGNAL This feature is used to see the present value of the high range flow
input signal. The type of electrical signal is determined by the
flowmeter input signal type selection.
Display: 4 mA
VIEW HIGH RANGE SIGNAL