Liquid Controls SP4000 - Manual (Page 39)

36
SP4000 Flow Computer
EZ SETUP
2
RATE 1
TOTAL
6.2
EZ
SETUP
(Continued)
FULL SCALE VALUE
(PRESSURE)
DEFAULT VALUE
(PRESSURE)
2
RATE 1
TOTAL
2
RATE 1
TOTAL
INPUT SIGNAL
(PRESSURE) Select the appropriate pressure input signal.
Selection:
MANUAL PRESSURE, 4-20 PRESSURE (ABS.), 0-20
PRESSURE (ABS.), 4-20 PRESSURE (G), 0-20
PRESSURE (G)
Display: 4-20 PRESSURE (ABS.)
INPUT SIGNAL
Enter the full scale value for the pressure input signal.
Input:
Number with fixed decimal point:
000.000 ... 999.999
Display: 580.000 psia
FULL SCALE VALUE
Enter the default value for the pressure input signal.
Input:
Number with fixed decimal point:
000.000 ... 999.999
Display: 14.696 psia
DEFAULT VALUE
NOTE: After the last entry has been saved, the display automatically
returns to the HOME position. The “EZ Setup” routine is
completed and the flow computations are resumed.
6.3
DETAILED
MENU
DESCRIPTION
DETAILED MENU DESCRIPTION
The menu organization for the unit is depicted in Appendix B. The first
depiction is that available with the operator password. The second is that
available with supervisor password.
Please reference Appendix B while reviewing the detailed descriptions for each
menu location in the following sections.