Liquid Controls SP4000 - Manual (Page 49)

46
SP4000 Flow Computer
SYSTEM UNITS
Select the unit of corrected volumetric flowrate
(corrected volume/time base).
Note:
The unit selected here also applies to the following:
• Zero and full scale value for current
• Relay setpoints
Corrected Volume = volume measured under operating
conditions converted to volume under reference conditions.
Selection:
The available selections will change depending on the flow equation
selected.
bbl/time base, gal/time base, l/time base, hl/time base, dm 3 /
time base, ft 3 /time base, m 3 /time base, scf/time base, Nm 3 /
time base, NI/time base, igal/time base, mcf/time base
All units listed above apply to corrected volume.
Display: scf/h
COR.VOL. FLOW UNIT
Select the unit of volume for the particular totalizer.
Note:
The unit selected here also applies to the following:
• Pulse value for pulse output
• Relay setpoints
Corrected Volume = volume measured under operating conditions
converted to volume under reference conditions.
Selection:
The available selections will change depending on the flow equation
selected.
bbl, gal, l, hl, dm 3 , ft 3 , m 3 , scf, Nm 3 , NI, igal, mcf
All units listed above apply to corrected volume.
Display: scf
COR.VOLUME TOT.UNIT
COR.VOL.
FLOW UNIT
COR. VOLUME
TOT.UNIT
6.6
SYSTEM
UNITS
(Continued)