Liquid Controls SP4000 - Manual (Page 44)

41
SP4000 Flow Computer
SYSTEM PARAMETERS
6.4
SYSTEM
PARAMETERS
(Continued)
The order code (part number) of the unit can be entered. This will
help in identifying what options were ordered.
Note:
• The order number is set at the factory and should only be
altered if options are added in the field by an authorized
service technician.
• Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;
Flashing selections can be changed.
Store and Confirm entries with the ENTER key
Display: SP4000V10P
ORDER CODE
The serial number of the unit is assigned at the factory.
Note:
Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;
Display: SN 12345
SERIAL NUMBER
ORDER CODE
SERIAL NUMBER
SERIAL-NO. SENS. The serial number or tag number of the flowmeter can be entered.
Note:
Maximum of 10 characters.
Input:
Alphanumeric characters for each of 10 positions
1...9; A...Z;_, <, =, >, ?, etc.
Flashing selections can be changed.
Store and Confirm entries with the ENTER key.
Display: SN 12345
SERIAL-NO. SENS.