beautypg.com

Device not found, Screen 20: device not found – Liquid Controls DMS Setup User Manual

Page 59

background image

59

Device Not Found

Screen 20: Device Not Found

Once the active LCRs are set up,

LCR# (F4) can be used

to switch between the active LCRs. Assuming that only

one LCR has been set up,

LCR# (F4) will open a list box

window with only one item to select. If there are two LCRs

configured, the list box window will contain two items to

choose from.
If the operator opens the list box window for

LCR#, selects

an LCR, and the LCR is no longer communicating, then

Screen 20 will display, letting the operator know that there

is a problem communicating with the

LCR# selected. This

may be a simple issue of a disconnected cable or power

has been removed from the LCR.
This screen will also appear anytime communication with

the active LCR is lost.

LCR #xxx not found.

Check the LCR to ensure it

has power applied and that

its communications cable is

connected to the DMS i1000.

Press F1/Dlvy or F4/LCR# when

ready to attempt to reconnect.

Dlvy LCR# Main