Liquid Controls DMS Setup - Manual (Page 12)

12
System Utilities
Screen 1: Program Initialization
DMS i1000 Version Display
Shows current version numbers of all installed applications
and supporting software libraries. Use PgDn (F4) to scroll
down to view version numbers.
For newly installed LectroCount DMS i1000 systems,
DMS i1000Menu will launch the first time the system is
powered up. The display to the right will appear on the
DMS i1000 Lap Pad prompting the operator to press Util
( F1) to advance to the System Utilities menu.
NOTE: If DMS i1000Menu is not displayed upon initial
startup, press ALT and ESC together to access DMS
i1000Menu. Press Util (F1) to advance to Screen 2a
shown below.
Screen 2a: System Utilities (1/3)
System Utilities consists of three screens. To advance
through these screens, press Next (F1). To exit this menu,
press Exit (F5).
Move pointer to Language and press ENTER to open a
list box window with options for the language to be used
by DMS i1000Menu. Move pointer to desired option and
press ENTER to accept.
Press Vers (F4) to open DMS i1000 Version Display
(shown below) which contains version numbers of the
application and supporting software libraries. There are
a minimum of six applications, it will be necessary to
scroll up and down to view all installed application version
numbers.
DMS i1000 Menu 1.02
(c) Liquid Controls LLC
ROM-DOS (c) Datalight Inc.
Support SDKs
PgDn End
(1/3)
English
MM/DD/YY
SYSTEM UTILITIES
Language:
DMS i1000 Password:
DMS i1000 Date Format:
Language
English
(1/3)
English
MM/DD/YY
12/11/05
16:00:31
SYSTEM UTILITIES
Language:
DMS i1000 Password:
DMS i1000 Date Format:
DMS i1000 Date:
DMS i1000 Time:
Next Vers Exit
Data Management System v1.00
Welcome to the DMS i1000!
To set up your system, go to
SYSTEM UTILITIES by pressing
the F1/Util key.
Util