Liquid Controls DMS Setup - Manual (Page 49)

49
Security
Screen 12: Security
User Key is the access code used to unlock the
LectroCount. If LectroCount is currently locked, entering
the correct User Key will unlock it. If LectroCount is
currently unlocked, setting the User Key will change the
access code used to unlock it.
Press
ENTER to open a field edit window and enter an
alphanumeric code up to ten characters in length.
After
User Key has been programmed, the system can
be unlocked by re-entering the User Key access code.
Move pointer to Security and press ENTER to open a list
box window with options Locked or Unlocked. To lock the
system, select Locked and press ENTER. To unlock the
system, return to User Key and enter the access code.
Factory Key is for factory use only. If correct Factory
Key access code is entered, the display will advance to
Screen 13a on page 50.
If the
Factory Key access code is not known, press Main
( F5) to return to Screen 2 on page 20. Move pointer to
Save Configuration and press ENTER to advance to
Screen 14 on page 51.
NOTE: If Factory Key access code is required, contact
the Liquid Controls Group service department.
1
Locked
SECURITY
User Key:
Security
Factory Key:
Cnfg Main