Burkert Type 8136 - Manual (Page 59)

11 Supplement
11 .1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts with encapsulated antenna system
-
Process fitting PVDF, 316L
-
Process seal FKM (IDG FKM 13-75)
-
Antenna PVDF
Materials, wetted parts with plastic horn antenna
-
Adapter flange PP
-
Seal, adapter flange FKM (COG VI500), EPDM (COG AP310)
-
Antenna PBT-GF 30
-
Focussing lense PP
Materials, non-wetted parts
-
Compression flange PP
-
Mounting strap 316L
-
Fixing screws, mounting strap 316L
-
Fixing screws, adapter flange 304
-
Housing plastic PBT (Polyester), 316L
-
Seal between housing and housing
cover Silicone
-
Inspection window in housing cover
(optional) Polycarbonate
-
Ground terminal 316L
Process fittings
-
Pipe thread, cylindrical (ISO 228 T1) G1½ A
-
American pipe thread, tapered 1½ NPT
-
Flanges DIN from DN 80, ANSI from 3", JIS from DN 100
10K
-
Hygienic fittings Clamp, bolting according to DIN 11851, Tuchen-
hagen Varivent
Weight depending on process fitting and
housing material 0.7 … 3.4 kg (1.543 … 7.496 lbs)
Max. torque, mounting screws - strap on the
sensor housing 4 Nm
Max. torque flange screws
-
Compression flange DN 80 5 Nm (3.689 lbf ft)
-
Adapter flange DN 100 7 Nm (5.163 lbf ft)
Max. torque for NPT cable glands and Conduit tubes
-
Plastic housing 10 Nm (7.376 lbf ft)
LEVEL TRANSMITTER 8136 • 4 … 20 mA/HART - two-wire 59
11 Supplement
41783
-EN
-
120316