Burkert Type 8035 - Manual (Page 74)

72
Operatingandfunctions
→
To interrupt the dosing, press
ENTER
: the valve connected to output DO2 and possibly the valve connected
to output DO3 close, the device state LED flashes at a 1 Hz-frequency and the DO4 output (if configured to
transmit the device state, see chap. “9.7.26”) generates a 1 Hz-frequency.
CONtiNUE
RESEt
→
To continue the dosing via the digital inputs:
• Let the DI1 digital input activated.
• then send a pulse on DI4.
→
To continue the dosing via the navigation keys, when the digital input DI1 is activated:
• display "CONTINUE" by pressing key 0......9 or ,
• then press key
ENTER
.
→
To abort the dosing via the digital inputs:
• Deactivate the DI1 digital input.
• then send a pulse on DI4.
→
To abort the dosing via the navigation keys, when the digital input DI1 is activated:
• display "RESET" by pressing key 0......9 or ,
• then press key
ENTER
.
10.5 % The counting of the dosing quantity continues.
Process level: the device is ready for a new dosing.
Figure 51: Interrupting the dosing, in dosing mode "EXT. REP."
English
Type 8025 - 8035 BATCH