Burkert Type 8035 - Manual (Page 52)

50
Operatingandfunctions
9.4 using the navigation keys
you want to... press...
move between parameters within a level or a menu.
• to go to the next parameter.
•
0......9
to go to the previous parameter.
access the Parameters menu.
ENTER
+ simultaneously for 5 s, in the Process level, if
no dosing has been started.
access the Test menu.
0......9 + +
ENTER
simultaneously for 5 s, in the
Process level, if no dosing has been started.
access the Information menu.
for 2 s, in the Process level, when the device state
LED is orange or red and no dosing has been started.
access the History menu.
0......9 for 2 s, in the Process level, if no dosing has been
started.
reset the daily volume or mass totalizer, from the
Process level.
0......9 + simultaneously for 2 s, when the daily volume
or mass totalizer is displayed in the Process level
reset the daily totalizer of the done dosings, from the
Process level.
0......9 + simultaneously for 2 s, when the daily
totalizer of the done dosings is displayed in the Process
level
select the displayed parameter.
ENTER
confirm the displayed value.
ENTER
modify a numerical value.
•
0......9
to increase the blinking digit.
• to select the digit at the left of the blinking digit.
• 0......9 + to move the decimal point.
→
To start a dosing, see chap. “9.6”.
English
Type 8025 - 8035 BATCH