Burkert Type 8035 - Manual (Page 68)

66
Operatingandfunctions
→
To interrupt the dosing, press
ENTER
: the valve connected to output DO2 and possibly the valve connected
to output DO3 close, the device state LED flashes at a 1 Hz-frequency and the DO4 output (if configured to
transmit the device state, see chap. “9.7.26”) generates a 1 Hz-frequency.
CONtiNUE
RESEt
→
To continue the dosing via the digital inputs:
• let at least one of the 3 digital inputs, DI1, DI2 or DI3, activated
• then send a pulse on DI4.
→
To continue the dosing via the navigation keys:
• display "CONTINUE" by pressing key 0......9 or ,
• then press key
ENTER
.
→
To abort the dosing via the digital inputs:
• activate then deactivate one of the 3 digital inputs, DI1, DI2 or DI3, to make sure that "RESET"
is displayed,
• then send a pulse on DI4.
→
To abort the dosing via the navigation keys:
• display "RESET" by pressing key 0......9 or ,
• then press key
ENTER
.
37.8 L The countdown of the dosing quantity continues.
V1 The device is ready for a new dosing.
Figure 46: Interrupting the dosing, in dosing mode "EXT.+LOC."
English
Type 8025 - 8035 BATCH