Burkert Type 8035 - Manual (Page 70)

68
Operatingandfunctions
If the message "ERROR [T]" is displayed during a dosing, see chap. “10.3.4” and “9.7.11”.
Process level (the digital inputs DI1, DI2 and DI3 are deactivated).
→
To start the dosing, activate the digital input DI1 for a duration T related to the dosing
quantity.
→
To interrupt the dosing, see “Figure 48”.
1156 L
The counter is incremented (the units blink).
→
To read the flow rate measured in the pipe, press or
0......9
.
→
To read the total dosing quantity, press or
0......9
once.
6.3206 L
When the digital input DI1 is deactivated and the quantity proportional to the activation duration
has been reached:
• the valves are closed,
• and the total dosed quantity is displayed (the dosing units do not blink any more).
100.06 L
Figure 47: Doing a dosing, in dosing mode "EXT. [T]"
English
Type 8025 - 8035 BATCH