Burkert Type 8035 - Manual (Page 56)

54
Operatingandfunctions
9.6 Details of the process level
This level is active by default when the device is energized.
If the power supply of the device is shut down while a dosing is being done, the dosing has been inter-
rupted when the power supply is restored: to continue or abort the dosing depending on the dosing mode
that is active on the device, see chap. “9.6.1” to “9.6.7”.
Displayed in the Process level when the configured dosing mode is "LOC. REP" (see
chap. “9.7.6”).
Do a dosing, using the navigation keys, of the quantity determined by means of a
Teach-In procedure.
Displayed in the Process level when the configured dosing mode is "EXT.+LOC" (see
chap. “9.7.10”).
Do:
• a dosing using the digital inputs.
• or a semi-automatic dosing: the quantity to be dosed is chosen via the navigation
keys but the dosing is started using the digital inputs.
Value of the main volume or mass totalizer, total quantity of fluid counted by the device
since the last reset.
Value of the daily volume or mass totalizer (identified by a dot after the volume or mass
units), quantity of fluid counted by the device since the last reset.
BAtCH R.
BAtCH S.
87654 L
231 L.
0......9
0......9
> 2 s
Resets:
• the daily volume or mass totalizer (identified by a dot after the volume or mass units).
• or the daily totalizer of the done dosings (identified by a dot after letter B).
+
1254 B
21 B.
Value of the daily totalizer of the done dosings (identified by a dot after letter B) since
the last reset.
Value of the main totalizer of the done dosings since the last reset.
Displayed in the Process level when the configured dosing mode is "LOC MANU" (see
chap. “9.7.6”) or "MEM+MANU" (see chap. “9.7.8”).
Do a dosing by entering the quantity to be dosed using the navigation keys.
Displayed in the Process level when the configured dosing mode is "LOC MEM." (see
chap. “9.7.7”) or "MEM+MANU" (see chap. “9.7.8”).
Do a dosing by choosing the quantity to be dosed in the device memory using the
navigation keys.
BAtCH M.
BAtCH A.
English
Type 8025 - 8035 BATCH