Burkert Type 8035 - Manual (Page 66)

64
Operatingandfunctions
• To select the dosing quantity via the navigation keys, deactivate the 3 digital inputs DI1 to DI3.
• If a warning message is generated by the device and no dosing is being done, a long pulse (> 2
seconds) on DI4 allows for remotely accessing to the Information menu, whatever the state of the inputs
DI1 to DI3. See chap. “9.11”.
45.6 L
The dosing quantity is counted down.
→
To interrupt the dosing, see “Figure 46”.
REtURN
0......9
→
To choose another
dosing quantity, confirm
"RETURN".
→
To start the dosing, send a short pulse (< 2 s) on
the digital input DI4.
V3
Process level
BAtCH-S
OK Y/N
→
Choose the dosing quantity via the navigation keys.
→
Confirm.
→
Choose "OK Y" to confirm the chosen quantity.
→
Confirm by pressing key
ENTER
: the output DO4 (if it has been con-
figured to transmit the device state, see chap. “9.7.26”) sends out
1 to 7 pulses corresponding to the number of the chosen memory
(V1 to V7).
V1
V7
REtURN
0......9
→
Confirm.
Figure 44: Doing the dosing of a quantity from the device memory via the navigation keys and the digital input DI4, in
dosing mode "EXT.+LOC."
English
Type 8025 - 8035 BATCH