Burkert Type 8035 - Manual (Page 44)

42
Installationandwiring
7.6.9 Wiring the Do1 transistor output of a compact, a panel-
mounted or a wall-mounted version, 12-36 v DC
PE PE PE
L+ L- PE P- P+
NC
Iout
PULSE
DO1
Supply
12..36Vdc
Univ
Batch
(AO1)
300 mA
+
-
12-36 V DC
(*) +
-
+
- 5-36 VDC
PLC
Power supply of
the device
Power supply of
the device
PLC
PE PE PE
L+ L- PE P- P+
NC
Iout
PULSE
DO1
Supply
12..36Vdc
Univ
Batch
(AO1)
300 mA
(*) +
-
+
- 5-36 VDC
+
-
12-36 V DC
*) If a direct earth connection is not possible, fit a 100 nF/50 V capacitor between the negative power supply terminal and
the earth
Figure 31: NPN wiring of the DO1 transistor output Figure 32: PNP wiring of the DO1 transistor output
→
Configure transistor output DO1 acc. to chap. “9.7.19” to “9.7.23”.
7.6.10 Wiring the Do1 transistor output of a compact version,
115/230 v AC
→
Wire the transistor output DO1 as described in chap. “7.6.9”.
→
Configure transistor output DO1 acc. to chap. “9.7.19” to “9.7.23”.
English
Type 8025 - 8035 BATCH