Check the slide rails, 1 run the conveyor, Check wear or damage of guides in drive unit – FlexLink XT (макс. 30 кг) Тех. обслуживание User Manual
Page 9: 1 run the conveyor and check the guides (d), Check motor temperature, 1 measure the motor temperature, Other observations, Cleaning conveyor chain, Other mounting instructions, Spare parts
2002-12-11
9
Check the slide rails
1 Run the conveyor.
Irregular movement of the chain or noise may be
caused by damaged slide rail (E).
2 If you suspect damage, try to detect deformations
of the slide rail. (only necessary on the upper side
of the conveyor).
3 If slide rail has to be replaced, see “Replacement
Check wear or damage of guides in drive unit
1 Run the conveyor and check the guides (D).
Noise from the drive unit may be caused by
damage or wear of the guides.
2 If any guides have to be replaced, find spare part
kit in separate Spare Parts documentation
.
Check motor temperature
1 Measure the motor temperature.
2 Operation temperature > approx. 70ºC indicates
overload of conveyor. Check pallet weights and
queues and compare with system specifications.
Other observations
Use “Trouble shooting” on page 62.
Cleaning conveyor chain
Only warm water (50ºC), with soap if necessary, may
be used for cleaning conveyor chains.
Other mounting instructions
Spare parts
To find correct spare parts, see separate Spare Parts
documentation.
E
E
D
Measure temperature