FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 14)

2002-12-11 14
Stops and dampers
Recommended inspection interval
Inspection is recommended every 1500 operating
hours or every 3rd month depending on which case
that occurs first.
Check the damping function
1 Check the damping function.
2 If needed, fine adjust the damping function (A)
when the system is running.
CAUTION! Heavy pallets in combination with an
over damped stop can damage the stop.
Check noise level
1 Check the noise level.
2 If needed, adjust the external non-return throttle
valve (B) to reduce noise level. (Throttle valves are
not included in the delivery).
Other observations
Use “Trouble shooting” on page 62.
Spare parts
To find correct spare parts, see separate Spare Parts
documentation.
A
Not included
B