FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 63)

2002-12-11 63
XT Compact conveyor XTUC S11
Symptom Possible cause Action Reference If fault remains
Jerky movment
Noisy
Worn or damaged
conveyor links Replace links or
chain “Check wear or
damage of conveyor
chain” on page 6
Contact your local
FlexLink supplier
Conveyor chain too
loose Shorten conveyor
chain “Check elongation of
conveyor chain (only
valid for conveyor >
1500 mm)” on
page 6
Damaged or
deformed slide rail Replace slide rail “Check the slide
rails” on page 6
Worn driving belt Replace driving belt “Replace driving belt
on XT Compact
conveyor module” on
page 40
Drive motor
overheated
Drive unit infirm
Overloaded
conveyor Remove load and
test run.
Check recomended
load for the
conveyor.
Damaged motor Replace motor “Replace motor on
XT Compact
conveyor module” on
page 44
Incorrectly
connected electrical
cables Check wiring
diagram “Assembly manual
XT modules”
Damaged or
incorrectly
connected capacitor Check wiring
diagram.
Check capacitor “Assembly manual
XT modules”