FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 40)

2002-12-11 40
Replace driving belt on XT Compact conveyor module
Introduction
Valid for XT Compact conveyor only.
Tools
Instruction
Box wrench 8 mm
Allen key 3 mm
1 Remove the screws on the belt cover, use the
8 mm box wrench.
2 Remove the belt cover.
Remove the chains according to instruction
“Replace chain on XT Compact conveyor
module” on page 35
3 Use the 3 mm Allen key to loosen the screws
holding the drive unit cover, Remove the drive
unit cover and the two distance washers.