FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 49)

2002-12-11 49
3 Carefully lift upp the transfer unit.
4 Remove the screws (2×) which hold the motor,
use the 5 mm Allen key and the 10 mm box
wrench.
Replace the old motor and fasten the screws
using the 5 mm Allen key and the 10 mm box
wrench. Make sure to hook the driving belt to the
new motor.
5 When re-installing the transfer drive unit, make
sure that the electric cable (A) does not get stuck
between any moving parts.
6 Carefully fit the transfer drive unit.
A