FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 64)

2002-12-11 64
XT Conveyor XTUC _51/52
Symptom Possible cause Action Reference If fault remains
Jerky movment
Noisy
Worn or damaged
conveyor links Replace links or
chain “Check wear or
damage of conveyor
chain” on page 8
Contact your local
FlexLink supplier
Conveyor chain too
loose Shorten conveyor
chain “Check tension of
conveyor chain” on
page 8
Damaged or
deformed slide rail Replace slide rail “Check the slide
rails” on page 9
Worn infeed guides Replace infeed
guides
“Check wear or
damage of guides in
drive unit” on page 9
Drive motor
overheated
Drive unit infirm
Overloaded
conveyor Remove load and
test run.
Check the
recomended load for
the conveyor.
Damaged motor Replace motor “Replace motor on
XT conveyor drive
unit – Side mounted”
on page 32 or
“Replace motor on
XT conveyor drive
unit – Centre
mounted” on
page 33
Incorrectly
connected electrical
cables Check wiring
diagram See separate
enclosed SEW
wiring diagram
Brake (only valid for
drive unit HM) not
correctly connected Check wiring
diagram See separate
enclosed SEW
wiring diagram