FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 26)

2002-12-11 26
20 Fit and tighten the screws (4×M6). Use the 10
mm box wrench.
21 Fit the plastic sleeve on the drive shaft.
22 Fit the motor on the drive shaft.
23 Fit and tighten the screw. Use the 10 mm box
wrench. Fit the plastic cap.
CAUTION! Make sure that the torque arm fork
has entered the cage in a correct way. An
unlocked rotating motor can cause personal
injury.