Dynasonics DXN Portable Ultrasonic Measurement System - Manual (Page 69)

Axes Scaling Buttons
Control of the axis scaling is performed with the axes scaling buttons. Pressing the Axes button successively will move
through the three axis configuration choices as shown.
The X axis is always time based. Use the Expand (+ magnifying glass) or Contract (- magnifying glass) buttons to either expand
or contract the time line shown on the horizontal (X axis). The minimum graph time period is 10 seconds and the maximum is
1 year.
The Axis Y Lt and Axis Y Rt functions control the scale of the left hand and right hand sides of the graphs Y axis respectively.
The Expand and Contract buttons work in the same fashion as on the X axis except for on the Y Lt and Y Rt axis they are used
to expand or contract the range of the vertical scaling.
The Up Arrow and Down Arrow buttons are used to shift the zero point of the graph up or down.
Pressing the Home button resets the graph to the parameters set using the Graph>Setup screen.
Axes
X
Axes
Y Lt
Axes
-
Home
Axes
-
Figure 90: Graph Axis Configuration
Installation & Operation Manual
Page 69 February 2013