Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 93)

Extended System-Level Command Functions
85
(SA) SOP Adjust – This command sets the start of print (SOP) location, relative to
the top of form. See O for command details. The EX2 accepts this command for
backward compatibility only, limited in range (28-228).
(SC) Scalable Cache – This command sets the number of 1K blocks allocated for
the scaleable font engine. Available memory dependent upon model; see Appendix
K.
(SE) SOP Emulation – This command enables the O and f print
positioning commands to allow backward compatibility with label formats designed
for other printers.
(SF) Save As Filename – This command, which may be sent separately or included
as the last command in an Kc command string, saves the effective printer
configuration to a file in Flash memory with a .dcm file extension.
(SG) Sensor Gain Value – This command sets the control of the voltage to the LED
emitter of the Media Sensor.