Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 47)

Extended System-Level Command Functions
39
[LF ] [CR ]
[LF ] Printer Model:[CR ]
[LF ] [CR ]
[LF ] WLS FW Upgrade[CR ]
[LF ] Update Type:[CR ]
[LF ] [CR ]
[LF ] CFG File:[CR ]
[LF ] /DO/config.cfg[CR ]
[LF ] TFTP Srv IP:[CR ]
[LF ] 0.0.0.0[CR ]
[LF ] TFTP Port:[CR ]
[LF ] 69[CR ]
[LF ] Use Beeper:[CR ]
[LF ] Yes[CR ]
[LF ] Display Mode:[CR ]
[LF ] Yes[CR ]
[LF ]HOST SETTINGS[CR ]
[LF ] HOST TIMEOUT:[CR ]
[LF ] 10 secs[CR ]
[LF ]CONTROL CODES:[CR ]
[LF ] Standard Codes[CR ]
[LF ]FEEDBACK
CHARACTERS:[CR ]
[LF ] Disabled[CR ] [LF ]ESC SEQUENCES:[CR ]
[LF ] Enabled[CR ]
[LF ]HEAT COMMAND:[CR ]
[LF ] Enabled[CR ]
[LF ]SPEED COMMANDS:[CR ]
[LF ] Enabled[CR ]
[LF ]TOF SENSING
COMMANDS:[CR ]
[LF ] Enabled[CR ]
[LF ]SYMBOL SET
COMMAND:[CR ]
[LF ] Enabled[CR ]
[LF ]CNTRL-CODES
(DATA):[CR ]
[LF ] Disabled[CR ]
[LF ]STX-V SW SETTINGS:[CR
]
[LF ] Disabled[CR ]
[LF ]MAX LENGTH
COMMAND:[CR ]
[LF ] Disabled[CR ]
[LF ]PROCESS SOH
(DATA):[CR ]
[LF ] Disabled[CR ] [LF ]MEDIA COUNTERS[CR ]
[LF ] ABSOLUTE
COUNTER:[CR ]
[LF ] 1707[CR ]
[LF ] 03/05/2013[CR ]
[LF ] RESETTABLE
COUNTER:[CR ]
[LF ] 1707[CR ]
[LF ] 03/05/2013[CR ]
[LF ]DIAGNOSTICS[CR ]
[LF ] HEX DUMP MODE:[CR ]
[LF ] Disabled[CR ]
[LF ] PRINT TEST
RATE(MIN):[CR ]
[LF ] 0[CR ]
[LF ] SENSOR READINGS:[CR ]
[LF ] Refl: Disabled[CR ]
[LF ] Tran: 198[CR ]
[LF ] Present: 0[CR ]
[LF ] TPH Thr: 109[CR ]
[LF ] 24 VDC: 178[CR ]
[LF ] Ribbon: 205[CR ]
[LF ][CR ]
[LF ]END OF LIST[CR ]

The format of the displayed information will vary with printer, model, firmware version,
and equipped options.