Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 68)

Extended System-Level Command Functions
60
(CU) Configuration Upgrade Package Parameters – This command allows an
upgrade package to be created.
Syntax:
KcCU[nnn
1
,vvvv
1
:nnn
2
,vvvv
2
:…,nnn
n
,vvvv
n
:];
Where:
nnn
i
,vvvv
i
: Configuration Item – Value pairs
nnn
i
Decimal Item Numbers from 1 to 9999
, Decimal Item Number Delimiter
vvvv
i
Item Value (syntax defined later)
: Item Value Delimitermimitd
Example – Discoverable on, service name is “smartchoice”, Bluetooth name is
“bestprinter”.
KcCU[1,1:2,’/DO/Denali.cfg’:3,’192.168.99.1’:4,69:5,’2011/04/26_1623’]
Configuration Upgrade Package parameters are defined by the following table:
Item
Number
Name Available
to User
(Y/N)
Value Type Description
1 Wireless Upgrade
Type
Y Unsigned short 1-TFTP
2-Avalanche Wavelink
3-MSP
255 – Disable
2 Configuration File Y String Configuration file name (*.cfg)
for an Upgrade Package, 256
chars max.
3 TFTP IP address Y String IP address of TFTP server.
4 TFTP Port Y Unsigned short Port Number of TFTP Server,
default 69
5 Upgrade Package
Version
Y String Read only.
6 Wireless Upgrade
Beeper
Y Char 0: Off; 1: On (Default).
(DE) DPI Emulation – This command allows printers with higher resolutions to
emulate lower print resolutions, as follows:
• 600 DPI can emulate 300 and 203 DPI resolutions; and,
• 400 DPI can emulate a 203 DPI resolution; and,
• 300 DPI can emulate a 152 DPI resolution.
(DK) Darkness – This command adjusts the length of the print head strobe to fine-
tune the HEAT setting.