Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 83)

Extended System-Level Command Functions
75
WIFI Settings
# Ezprint Name Value Type Description
40 CTC:T:H|P Network Type Unsigned
char H: AdHoc
P:Infrastructure
41 CTC:E: ESSID String 128 characters + 1 NULL terminated string
42 CTC:NA: Network Authentication Type Enumeratio
n type or
unsigned
short
NET_AUTH_TYPE_NONE =0
NET_AUTH_TYPE_LEAP=1
NET_AUTH_TYPE_WPA_PSK=2 (WPA Personal)
NET_AUTH_TYPE_WPA=3 (WPA Enterprise)
NET_AUTH_TYPE_WPA_LEAP = 4 (obsolete)
NET_AUTH_TYPE_WPA2_PSK=5 (WPA2 Personal)
NET_AUTH_TYPE_WPA2=6 (WPA2 Enterprise)
NET_AUTH_TYPE_HOST_BASED_EAP=7
43 CTC:ET: EAP Type Unsigned
char
EAP-LEAP (17)
EAP-TTLS (21)
EAP-PEAP (25)
EAP-FAST (43)
44 CTC:P2M: Phase 2 Method Unsigned
char
Inner authentication:
0: None
EAP-GTC: 1 (Default)
EAP-MSCHAPV2: 2
EAP-MD5: 3
GTC: 4
MSCHAPV2: 5
MSCHAP: 6
CHAP: 7
EAP-TLS: 8
45 CTC:LU: User Name String 128 characters + 1 NULL terminated char; Write ONLY
attribute!
46 CTC:LH: User Password String 128 characters + 1 NULL terminated char; Write ONLY
attribute!
47 CTC:LU2: Pass Phrase String 63 characters + 1 NULL terminated char; Write ONLY
attribute!
48 CTC:W:1|2 WEP data encryption Unsigned
char 1: Enable WEP data encryption
2: Allow WEP unencrypted traffic (Default)
49 CTC:S:0|5|13 WEP AP authentication Unsigned
char
Indicate the AP authentication method via WEP. The value
specifies the WEP key length.
0: Open
5: uses Shared Key 40- bit WEP key
13: uses Shared Key 128-bit WEP key
50 CTC:K:1|2|3|4 WEP Key Selected Unsigned
char
Indicates which WEP key is currently selected for WEP AP
authentication, if specify.