Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 78)

Extended System-Level Command Functions
70
(NE) Network Configuration – The enhanced configuration two character
identifier for the New Network Configuration Parameters will be ‘NE’ for Network
Ethernet. No Item-Value pairs will be defined for ‘NE’ but there will be the following
Sub-Groups:
General Network Configuration Parameters – Identifier ‘G’
802.3 Wired Ethernet Configuration Parameters – Identifier ‘EW’
802.11 Wireless Ethernet (WIFI) Configuration Parameters – Identifier
‘WIFI[DO1’
The configuration data stream for the new network configuration parameters will thus have
the following structure:
NE[G[…]EW[…]WIFI[DO1[…]]];
Example :
"KcNE[G[24,4:]WIFI[DO1[21,N:22,'192.168.081.001':23,'255.255.000.000':24,'
192.168.081.004':40,P:41,'MFG_ENG_S2':42,2:47,'1234567890':]]];"
General Configuration Parameters – Identifier ‘G’
The ‘G’ sub-group contains network configuration parameters that apply ‘globally’
or ‘generally’ to any ethernet interface used. No sub-groups are currently defined
for the ‘G’ sub-group of configuration parameters, only item-value pairs. The
‘Item-Value’ pairs within the ‘G’ sub-group are defined by the following table:
# Name Value Type Description
1 Primary Interface Char Indicates the primary or used ethernet
interface type. Interface types are Wired
Ethernet (802.3) and Wireless Ethernet
(802.11). It is called ‘Primary’ since, in the
future if multiple ethernet interfaces would
be supported, it would be the PRIMARY
interface used.
‘E’=Wired Ethernet
‘W’=WIFI
‘B’=Bluetooth
‘N’=None
2 Network Password String Provides the network password used for
WEB and TELNET sessions.
3 SNMP Enable Boolean Enables or Disables the SNMP services.
4 Telnet Enable Boolean Enables or Disables the TELNET services.
5 FTP Enable Boolean Enables or Disables the FTP Server.
6 HTTP Enable Boolean Enables or Disables the HTTP (WEB Pages)
Server.
7 LPD Enable Boolean Enables or Disables the LPD (Line Printer
Daemon) services.
8 NetBIOS Enable Boolean Enables or Disables the NetBIOS services.
9 Netcenter Enable Boolean Enables or Disables the Netcenter services.
10 Gratuitous ARP Period Decimal Value of the Gratuitous ARP Period in
seconds. 0 = Disabled.
24 WIFI Type Decimal WIFI Module type DO1=4. Values are 0
– none or 4. Values 1,2 &3 are legacy
values.