Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 82)

Extended System-Level Command Functions
74
Network Settings
# Ezprint Name Value Type Description
24 CTC:G:xxx.xxx.xxx.xxx Active Gateway address (READ
ONLY) String This field is holding the value of current active Gateway
address.
As the result of the query request:
1. If “IP address method” is set to “use static Subnet
mask address”, this field will hold the value of “Static
Gateway address”.
2. Otherwise, it will hold the value of the current active
Gateway address.
This field is using for reporting only. In order to set the
value for static Gate address, use item number 34.
25 CTC:N: Printer DNS name String 64 characters + 1 NULL terminated charater
26 CTC:RDNS:Y|N Register To DNS String- 1
char long
Register Printer Name (~ Station Name) to DNS server.
Default value is “Y”
27 CTC:UDNS:Y|N Use DNS Suffix String – 1
char long
Using the DNS suffix for a fully qualification name when
referring to the DNS name. Default value is “N”
28 CTC:P3: UDP port Unsigned
short
Default is 515
29 CTC:P: TCP port Unsigned
short
TCP port number. Default is 515
30 CTC:CR:N|Y Enable Connection Status Unsigned
char
Y: enable of reporting connection status
N: disable of reporting connection status
31 CTC:DOP: DHCP User Class Option Binary Data This is the data for the User Class Option for DHCP. Max.
length is 257 bytes.
32 Static IP Address String Printer statics IP address. Use this field to set or get the
value of printer static IP address.
33 Static Subnet mask String Printer statics Subnetmask address. Use this field to set or
get the value of printer static Subnet mask address.
34 Static Gateway String Printer static gateway address. Use this field to set or get
the value of printer static Gateway address.
35 LPD Port Unsigned
short
Default 515
36 LPD Enable Boolean Enables or Disables the LPD (Line Printer Daemon) services.